Widely known as snake plants, Sansevieria Fernwood is one of the toughest varieties you can find out there. Either outdoors or indoors, these species will perfectly add beauties to your spaces.
Snake plants make a good pair for many other species with their spiky leaves. Even though most people do not like them due to the strong, bold look and sharp, rough leaves, they are still worth trying.
They are very effortless to grow and require low maintenance. Thus, if you have no problem with their less ‘touchy-feely’ characteristics, Sansevieria Fernwood is something ideal for your urban garden.
1. Basic Knowledge about Sansevieria
Whether growing on the ground or in a pot, snake plants are highly appealing. Their modern and edgy appearances make many people fall in love and eager to grow them in the garden.
Even though they cannot tolerate strong desert sun, snake plants are still capable to handle the arid air like champions.
Sansevierias are a houseplant that can reach 20 cm to 2.1 m in height. You will typically find this species sold in 4, 6, 8, 10, or 12 inches of pot sizes.
Because of the common Sansevieria Fernwood size, most people tend to use it as a centerpiece of a table and small floor plants. You can also take advantage of these species in dish gardens.
The escalation rate of snake plants is slow to moderate. They typically multiply by underground stems that are known as rhizomes. These shoots will pop up as new growth in the end.
In an area with strong natural light, the Sansevieria Fernwood will cultivate quicker. Otherwise, it may grow slower when does not receive enough illumination.
2. Reasons to Grow Sansevieria in Your Garden
If you do not have enough reasons to grow Sansevieria Fernwood, the following information should help to change your mind.
Firstly, Sansevieria is one of the best houseplants in terms of air purification since it is capable to remove toxins while providing oxygen in your spaces.
It makes a good houseplant for your bedroom since Sansevieria tends to discharge the oxygen at night.
However, do not expect that one snake plant can purify the entire bedroom because it only purifies the surrounding air.
While helping with air circulation, Sansevieria may aid in reducing bad odor too. For instance, you have painted a room and an unpleasant smell fills in the space.
Sansevieria presence in the room comes in handy in cleaning up the air, so that you can paint comfortably or utilize other strapping chemicals less harmfully.
Secondly, snake plants are considered as a ‘good luck’ houseplant as well. The primary reason is, once again, its purifying nature.
Besides, Sansevieria Fernwood is also available in a broad variety of forms, colors, patterns, and sizes. As a result, it can fit any decoration purpose either inside or outside your home.
If you are a novice gardener and want to get amazing results, be sure to add this plant on your list. Sansevieria is very simple to grow, so it will not make you discouraged in the first try.
Surprisingly, snake plants can be a great source of fiber as well. Sansevieria Fernwood offers the compound from its foliage, especially when it is dried up.
To harvest the fiber, you can submerge the leaves of snake plants in water for 21 days and then pull the foliage apart. People often utilize it for creating ropes, bowstrings, and even craft jewelry.
3. Tips to Care for Sansevieria Fernwood
This has been said that growing snake plants is probably one of the easiest things to do in gardening. For watering, be careful not to overdo it unless you want your Sansevieria rots out.
You should make sure that the soil is nearly dry before showering it with water again thoroughly.
Consider watering your Sansevieria Fernwood every two to eight weeks. Depending on the surrounding environment, pot size, and kind of soil mix, the schedule of showering the plant may vary.
The rule of thumb is to decrease the amount of water provided throughout the winter months. If your snake plants grow in a large container, do it every eight weeks.
Once the temperatures are cooler and the sunlight is not as strong as usual, just let your Sansevieria take a rest by not providing it with anything.
Moreover, you need to make sure that there is no built-up water in the middle of the leaves since this plant tends to form a kind of cup. Leaving it this way can promote a mushy Sansevieria and lead to rot.
Sansevieria Fernwood Soil and Repotting
Sansevieria Fernwood is not fussy about its soil nutrient requirements. However, since root rot is the main problem that often kills this plant, you had better find a quick and well-draining soil mix to avoid such an issue.
For example, you can combine succulent and cactus mix with potting soil in an equal ratio. If your mixture seems very heavy, consider adding some perlite or pumice to increase the aeration as well as drainage factors.
Adding pumice or perlite makes a good option if the container only acquires one or two small-sized drain holes as well.
Meanwhile, Sansevieria Fernwood repotting is something you do not have to rush about. Since this plant tends to cultivate better when pot-bound, there is no need to be in a hurry.
You can repot your snake plants after 24 months since the last one. If the Sansevieria is cultivating in low light, try to transplant it every 5 to 10 years or once the cultivars broke their grow pots.
Light Amount and Temperature
Sansevierias will withstand an extensive range of temperatures in your home. It can even tolerate a very hot climate in the summer and cooler weather in the winter.
Snake plants can tolerate dry or stale air in our offices and homes. They even perform well in bathrooms where the clamminess is typically much higher.
If you place your Sansevieria Fernwood outdoors, just make sure to move the plant indoors when the temperatures have not been dropping too low because it cannot stand snow or frost.
When it comes to light requirements, snake plants generally prefer medium one which is around 3 meters away from the south or west windows.
Interestingly, snake plants can endure both high and low light. However, in low-lit environments, darker-leafed varieties such as hahnii jade and S. trifasciata typically do better.
On the other hand, species with more brilliant variegations tend to turn less intense and get some patterns when situated in low-lit conditions.
Just keep in mind never to put your Sansevieria Fernwood under direct sunlight since it may be burnt in no time.
Possible Pests and Diseases
Luckily, snake plants are very resistant to pests. However, in poor environments, spider mites and mealybugs may infest your Sansevieria.
If your plants suffer from mealybugs, make sure to take any necessary action immediately since the pests can spread like crazy.
Besides, pests are capable to move from one plant to another rapidly, so you have to control them as soon as any symptom occurs.
When it comes to diseases, fungal issues often affect Sansevieria Fernwood. These problems typically occur because of moisture on the plant’s foliage.
Red leaf spot and southern blight are the most common fungal diseases that happen on snake plants. These issues are signified by the occurrence of sunken lesions on the foliage that seems reddish brown.
The symptom can be followed by obvious web-like growths on the leaves. They tend to become harden and turn brown in the end.
You need to take prevention steps to avoid fungal infections occur on your Sansevieria Fernwood. Make sure to keep your plant’s leaves dry and water properly.
Brown leaves may also happen and often appear crunchy. This may indicate that you do not provide the fern with enough water.
When it happens, simply get rid of the problematic foliages and fix the issue by showering your plant anytime the surrounding soil gets dry.
For your further information, Sansevieria is generally safe for your pets. The plant might be slightly toxic in some ways, but it will not make a big problem in your cats or dogs.
4. Tips to Fertilize and Propagate Sansevieria
Sansevieria Fernwood soil does not have to be well-nourished, so utilizing fertilizer is frequently optional in growing this plant.
You can feed your plant with a topping of compost and worm manure if needed. Some expert gardeners practice it every spring in their houseplants including the Sansevieria.
Make sure to use a houseplant food of organic all-purpose type if you want to fertilize your snake plants. Do not forget to do fertilizing in either summer or spring maximally twice.
Fertilizing in late winter or fall is not recommended since it is time for your Sansevieria to rest. You should avoid feeding the plants when they suffer from bone dry or soaking wet.
Meanwhile, Sansevieria Fernwood propagation is very easy to do as well. Once you have an established plant, there is probably no need to purchase another one.
Naturally, snake plants will propagate themselves by spreading their rhizomes underground. If you grow them as a houseplant, separation followed by leaf trimmings is one of the simplest methods to do.
5. Sansevieria Varieties to Grow Indoors
Different from some other houseplants, Sansevieria Fernwood is everlasting. It also comes in a range of varieties, allowing you to pick one that suits your style and needs.
You can find these plants in tall and short, with flat, concave, or round foliage. The leaves can be variegated as well with white, yellow, silver, dark green, as well as chartreuse.
When it comes to Sansevieria Fernwood flowers, every variety of these plants is rarely blooming. Some of them may bear some blossoms but others just do not.
The blossoms are typically whitish to greenish with a sweet fragrance. However, you may need to wait for so long since Sansevierias do not bloom very often.
Sansevieria Black Gold
Also known as the Viper’s Bowstring Hemp, this variety of Sansevieria Fernwood is pretty famous for its dark green foliage and charming golden-yellow edge.
You can expect this snake plant to grow stiff, tall fibrous leaves that offer an exceptional sleek appearance. It typically reaches around 90 cm in height while the foliage may become 6 cm in width.
Although rare, you may enjoy their tiny tubular blossoms in the fall or summer. With or without the flowers, a snake plant will make a perfect addition to your living room or bedroom.
Sansevieria Twisted Sister
Twisted Sister acquires its name due to the way their yellow and green foliage curling around. This unique appearance is one of the good reasons to grow it indoors.
This Sansevieria Fernwood has variegated leaves that include lime green and bright golden yellow colors. You may also detect silvery-green smudges in the middle of the foliage.
Since the leaves can only reach around 30 to 38 cm, Twisted Sister is considered a dwarf variety of snake plants.
Sansevieria Futura Robusta
Futura Robusta is an evergreen snake plant that comes with grayish-green foliage in stripped outlines. It also has tiny leaves that look like a sword and cultivate in an opaque clump.
Different from the previous varieties, this variety of Sansevieria Fernwood can only reach about 60 cm in height. It typically grows properly indoors and is capable to tolerate rare watering.
Known as the tallest variety of snake plants, the laurentii is a cultivar that owns gorgeous variegated green and yellow foliage.
You can notice its grayish-green leaves coming with stripy patterns. This variety can grow up to 120 cm tall, making it perfect to beauty the corner of your room when it requires some height.
Aside from the mentioned varieties, you can also find some others such as Blue Sansevieria, Futura Superba, Kirkii, Kenya Hyacinth, and many more.
To sum up, snake plants can add beauty to your space instantly. Their bold, architectural look makes many homeowners prefer to put them indoors as tabletop. The big bonus is that you can easily grow and care for this houseplant!
Therefore, if you travel a lot and tend to ignore plants when busy, Sansevieria Fernwood is something perfect to keep in your garden.